FFf Eclectic Red Barn: Valentine from Scrap Trim Pieces

Wednesday, January 19, 2022

Valentine from Scrap Trim Pieces

Valentine from Scrap Trim Pieces

I wanted to do something different for my Valentine decoration this year, but what? I was cleaning  out some wood in the barn and created a pile of wood trim pieces that I used for testing paint colors. I hated to throw them away, but they were small pieces and not really "Valentine" colors. My mind started to work and I thought, why not a Valentine plaque. So here is what I created.
Valentine from Scrap Trim Pieces. Share NOW. #valentine, #valentinedecor, #eclecticredbarn
Let me tell you how I did this.
First: I found a piece of wood that would be big enough for my heart. I used a piece of lauan. I cut a heart from paper and then drew it on the front of the board and the back. Why the back, you will see later. Try and make sure they are in the same location.
Valentine from Scrap Trim Pieces. Share NOW. #valentine, #valentinedecor, #eclecticredbarn
Second: Do NOT cut out the heart shape at this time.  

Third: Begin placing your wood trim on the heart. Some of my pieces were long so I cut them so I could use them in different locations. I thought I had a picture of putting on the first ones, but I don't. Sorry. 

Here is the picture with the heart completely filled in. Notice that I placed the larger trim across the wide part of the heart and then turned the smaller pieces in the other direction at the top and bottom. I just kept playing until I liked the way it looked.
Valentine from Scrap Trim Pieces. Share NOW. #valentine, #valentinedecor, #eclecticredbarn
Make sure that the pieces extend over the heart lines. If you can find them!

Fourth: When I liked the look, I glued all the pieces with wood glue and let it dry over night. I know, how can I wait that long! It needs to be really secure for the next step.  

Fifth:  Now that it has all dried, turn the piece over. I placed it on an old piece of rug so I didn't damage it. Now using the heart pattern on the back, (remember I told you to draw one on the back too) cut out the heart with a jig saw. I had to sand very little when I was finished. The saw will do a nice job if you have a good blade in it. 

Sixth: For the burlap flower, I just gathered a piece of burlap in the middle and tied a piece of string around the center. 
Valentine from Scrap Trim Pieces. Share NOW. #valentine, #valentinedecor, #eclecticredbarn
I used a vintage Christmas bulb hanger that I flattened(the bulb broke when I was putting it away) and placed a vintage wooded bingo chip in the center.  Added a piece of ribbon and glued the flower on the heart.
Valentine from Scrap Trim Pieces. Share NOW. #valentine, #valentinedecor, #eclecticredbarn

Seventh: I drilled two holes with a drill press in the top of the heart and inserted wire for a hanger.  I hung it on my front door. Make sure you measure the distance down and across where you want the holes to be on each side or your plague will not hang straight.
Valentine from Scrap Trim Pieces. Share NOW. #valentine, #valentinedecor, #eclecticredbarn
Well, how do you like my rather unordinary Valentine heart?


10 comments :

  1. Pinned this post Beverly. What a cute, sustainable idea for Valentine's Day!

    ReplyDelete
    Replies
    1. Nancy,
      Thanks for the pin. I love being able to use scraps to make something beautiful.
      Hugs,
      Bev

      Delete
  2. Bev,
    I absolutely adore your heart! I love the colors, in needs to be hung year round!
    xo Lisa S

    ReplyDelete
    Replies
    1. Lisa,
      Thank you for your kind words. I love what it turns out better than you think it will.
      I never thought of keeping it up all year. lol!
      Hugs,
      Bev

      Delete
  3. Replies
    1. Michele,
      Thank you for the kind words. I did like the way it turned out.
      Hugs,
      Bev

      Delete
  4. This looks great! I love that it's not in traditional Valentine's Day colors. Great use of scraps too. XO- MaryJo

    ReplyDelete
    Replies
    1. MaryJo,
      Thank you so much for the sweet words. I liked that too that it was not red.
      Have a great week.
      Hugs,
      Bev

      Delete
  5. Replies
    1. Keira,
      Thank you so much for your sweet words on my scrap wood Valentine.
      Hugs,
      Bev

      Delete

I would love to hear from you. Your comments are special to me.



Related Posts Plugin for WordPress, Blogger...